[protege-discussion] Metamodel Project doesn't load as per Documentation

[Tania Tudorache]

Karl,

Several other projects are using Protege 3.4.7 client-server mode with 
no issue at all.

If you still have trouble with the metaproject, please send it to me, 
and I will take a look.

Tania

On 08/12/2011 05:31 PM, Schulmeisters, Karl wrote:
>
> Tania, I appreciate the idea that it means a corrupted meta-project, 
> but I've downloaded the installation 4 times, running it three times 
> on a Windows 2008 server, once on Windows 7, and my coworker 
> downloaded it independently on Windows XP with the same results.
>
> If it is corrupted, then I don't think the corruption is at our end
>
> *Karl Schulmeisters *| Alliance Technology Director|  Office of the CTO
>
> *From:*protege-discussion-bounces at lists.stanford.edu 
> [mailto:protege-discussion-bounces at lists.stanford.edu] *On Behalf Of 
> *Tania Tudorache
> *Sent:* Friday, August 12, 2011 2:12 PM
> *To:* User support for Core Protege and the Protege-Frames editor
> *Subject:* Re: [protege-discussion] Metamodel Project doesn't load as 
> per Documentation
>
> Karl,
>
> If there is no Project class in your metaproject, it means it is a 
> corrupted metaproject. The one that comes distributed with the Protege 
> installation will have Project under PolicyControlledObject.
>
> I suggest making a fresh installation of Protege 3.4.7 (please don't 
> use earlier versions, because they are not supported anymore). Open 
> the metaproject.pprj in protege, and check the subclasses of 
> PolicyControlledObject. The Project class should be there.
>
> There are very clear instructions on how to add your own project in 
> the metaproject here:
> http://protegewiki.stanford.edu/wiki/Protege_Client_Server_Tutorial_Configuration
>
> If you still have problems, please send me the metaproject files.
>
> Tania
>
>
> On 08/11/2011 04:53 PM, Schulmeisters, Karl wrote:
>
> I have spent about a week with multiple versions of Protégé (3.4.7, 
> 3.4.4, 3.3.1) in trying to set up a multi-user environment.  I have 
> followed the Multi-user instructions to the letter.  The problem 
> invariably comes when I load the "metaproject" project from the 
> Examples\server directory.  No "Projects" subclass appears under 
> "PolicyControlledObjec" class.
>
> And there is zero documentation on how to go about creating such 
> "Project" object
>
> Karl Schulmeisters
>
> Director Solutions Architecture, CTO Office
>
> 425-443-6741(c)
>
> *UNISYS***|  2010 156th Ave NE  |   Bellevue, WA 98007
>
> 	
>
>
> THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE 
> PROPRIETARY MATERIAL and is thus for use only by the intended 
> recipient. If you received this in error, please contact the sender 
> and delete the e-mail and its attachments from all computers.
>
> 	
>
>   
>   
> _______________________________________________
> protege-discussion mailing list
> protege-discussion at lists.stanford.edu  <mailto:protege-discussion at lists.stanford.edu>
> https://mailman.stanford.edu/mailman/listinfo/protege-discussion
>   
> Instructions for unsubscribing:http://protege.stanford.edu/doc/faq.html#01a.03
>
>
> _______________________________________________
> protege-discussion mailing list
> protege-discussion at lists.stanford.edu
> https://mailman.stanford.edu/mailman/listinfo/protege-discussion
>
> Instructions for unsubscribing: http://protege.stanford.edu/doc/faq.html#01a.03

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.stanford.edu/pipermail/protege-discussion/attachments/20110815/0a0dca86/attachment.html>